Super Ultralight R/C Airplane (Information)

[chinnathon]

Super Ultralight Unassembled Scale Airplane Complete Kit

  Specifications

- Wingspan: 53 in
 - Overall Length: 44 in
 - Steerable nose wheel
 - Flying Weight: 1720 grams
 - Wing Load: (19oz./sq ft)
 - Bolt-on wing mounting
 - Building time 80 hours
 - Retail Price 215 USD (Power system, Monokote and Shipping not included )





Power and Radio system For Prototype

 - Engine OS.25 LA
 - Propeller MJ 9060
 - Fuse Tank 180 c.c.
 - Flight Time: 15-20 minute
 - Tx  FF 8
 - Rx  DP 129
 - 7 Servo Mini HiTorque
 - Servo Towepro (MG90) Torque 2.2 Kg (Ruder+nose gear 1) (Elevator 1)
 - Servo Towepro (SG90S)Torque 2.0 Kg (Aileron 2)
 - Servo Towepro (SG90S)Torque 2.0 Kg (Flap 2)
 - Servo Towepro (SG90S)Torque 2.0 Kg (Throttle 1)
 - Battery Rx Li-Po 8.4V 2200 mAh
 - Bec  3 A  





Recommended Power and Radio System (GP)

 1. Engine .19 -.25 (2C) .26-.30 (4C)
 2. Propeller 9060
 3. Spinner 40 mm.
 4. 6 Channel Radio system
 5. 7 Servo Mini Hi Torque
   - Servo Torque 2.2 Kg (Rudder+nose gear1)
   - Servo Torque 2.2 Kg (Elevator 1)
   - Servo Torque 2.0 Kg (Aileron 2)
   - Servo Torque 2.0 Kg (Flap 2)
   - Servo Torque 2.0 Kg (Throttle 1)



Recommended Power and Radio System (EP)

 1. Brushless Motor 2810-2815 KV
 2. ESC 40 A
 3. Propeller 10 x 6
 4. Spinner 40 mm.
 5. Battery 11.1 V 2200 mha (20C) x 2
 6. 6 Channel Radio system
 7. 6 Servo Mini HiTorque
  - Servo Torque 2.2 Kg (Rudder+nosegear 1)
  - Servo Torque 2.2 Kg (Elevator 1)
  - Servo Torque 2.0 Kg (Aileron 2)
  - Servo Torque 2.0 Kg (Flap 2)

 
  Picture More:  http://www.thaiscalemodel.com/forum/index.php?topic=27.0

  Clip Vdo First Flight: http://www.youtube.com/watch?v=ObX_q2GDDSY

[chinnathon]

Ultralight Kit contents as follow;



 1. Fuselage & Wing contents pack
  2. Tail Section contents pack
  3. Pod Engine contents pack
  4. Pod Motor contents pack
  5. Windshield and side windows , Fuse Tank , Cable type, Nose Fiberglass Cowling
  6. Hardware content pack , wheel collars, landing gear set etc.
  7. Auto Cad Plan sheet 1:1  
  8. Report  contents pack
  9. CD Instruction Manual

The Box size 4"X9"X36" weight 2,XXXg



  1. Fuselage &. Wing contents pack

[chinnathon]

Kit Contents

 1. Flexible push rod for Rudder, Elevator, Nose gear,Throttle ( 2   Meter )
  2. Metal clevis for Rudder, Elevator, Nose gear , Throttle ( 4   pieces )
  3. Control horns for Aileron , Flap (4   set )
  4. Aileron , Flap pushrod wire ( 4   pieces )
  5. Control horns for Rudder, Elevator ( 2   set )
  6. Stopper Adjust Servo for Aileron , Flap, Rudder, Elevator, Nose gear,Throttle (8   set )  



  1. Elevator joiner  wire ( 1 pieces )
  2. CA Hinge (20 pieces )
  3. Plastic tab (battery hatch) (2 pieces )
  4. Antenna  tube  (1 pieces )
  5. 2x8 Sheet metal screw for Aileron , Flap mount (16 pieces )
  6. 2x6 Sheet metal screw for Nose Cowling ( 4 pieces )
  7. 1.4x5Sheet metal screw for front windshield ( 4 pieces )
  8. Wing strut mounts ( 2 pieces )
  9. Wing strut clevis  ( 2 pieces )
 10. Wing strut dowel ( 2 pieces )
11. Wing strut strap with screw ( 2 pieces )
12. Sheet metal screw for wing bolt pilot holes  ( 2 pieces )
13. M4 metal screw for wing bolt pilot holes      ( 2 pieces )
14. M4 wing bolt with plastic washer           ( 2 pieces )
15. M4 nut with wood washer for wing bolt doublers ( 2 pieces )




 1. Nose gear set   ( 1 set )
 2. 3 mm. Aluminum main landing gear ( 2 pieces )
 3. 55 mm. main wheels ( 2 pieces )
 4. 45 mm. nose wheel  ( 1 piece )
 5. M3X30 machine screw for main wheels ( 2 set )
 6. M4X10 machine screw  ( 6 pieces )
 7. M4 washer      ( 6 pieces )
 8. M3X20 machine screw  for Engine & Motor pod ( 3 set )



Decals set

  1. Sticker Super Ultralight (1 piece)
  2. Chin Model Air Craft  Logo  ( 1 set )
  3. Windshield (1 piece )
  4. Side windows   ( 1 set )
  5. Fuse Tank 180 c.c. ( 1 set )
  6. Cabal type for fuse tank ( 2 set )
  7. Sticker stripe tape ( 1 roll )
  8. Fiberglass Nose cowling (1 piece )

[chinnathon]

CNC Cutting Pod Engine Past & Report Contents Pack

[chinnathon]

CNC Cutting Fuselage Past & Report Contents Pack

[chinnathon]

CNC Cutting Wings Past & Report Contents Pack

[chinnathon]

 Super Ultralight Kit details



Molded designed Nose Cowling fiberglass for Super Ultralight



High strength and ease to install, pre bend 3 mm. aluminum main landing gear as the designed for Super Ultralight



Wing strut with nylon clevis, make it ease to remove the wing for travel



Battery hatch designed ease to access to the battery

[chinnathon]

Molded Side windshield designed for Super Ultralight only



Molded Windshield designed for Super Ultralight only



The fuselage bottom  below the curve designed for Super Ultralight only




Flap, Aileron servo installed on servo hatch Only servo arm protruded



Wing center section designed for Super Ultralight only



The Super Ultralight Kit Can install Engine and Motor Brushless  

[chinnathon]

Interlocking parts the fuselage resulting in scale accuracy and ease to assemble.
Assembly without using  plan and Setting Jig.



 CAD/CAM designed and CNC cutting, pre-notched for wing spar and wing ribs,and interlocking parts resulting in scale accuracy and ease to assemble.build without using plan and Setting Jig.

[chinnathon]

*** Everything you see will be included in this complete kit ***