From our customers

Cessna Skylane 182

Assembled by Mr. Vasu

Cessna Caravan 208B

Assemble by Mr. Thawatchai

Cessna 182

Assembled by Mr. Yai

Cessna 182

Assembled by Mr. Chakrit
(Install .09 engine)


Assemble by Mr. Thawatchai


Assembled by the women who is novice in assembling airplane kit, but  there is the diligent until succeed

Cessna 182

Assembled by Mr. Kajornsak
Install .15 engine
Pilatus Porter PC-6
- Wingspan 44 in. Fuselage length 31 in.
- Brushless Motor BL 2215 (1000 Kv) or .15 cu in   engine
- Propeller 9050
- Batt Li-Poly 11.1V 2000 mAh
- Flying weight 740 - 780 grams
- 4 Channel radio system driving 4 mini Servos (2 for   Ailerons)
- Aluminum shock absorber like a full size Porter and   realistic   performance
- Steerable Tail wheel 
- Building time 30-40 hours
- Price 115 USD ( Shipping not included )



Opening the box you will found the following kit package;
1. Auto Cad plan sheet A1 1:1 and CNC cut parts diagram
2. Step-by-step instruction manual
3. Fuselage and wing content pack
4. 3.0 mm and 6.0 mm. balsa wood pack
5. Epoxy adhesive 30 grams 1 set
6. Hardware pack
7. Decals set and molded windshield

*** Monokote and CA glue not included ***
Pilatus Porter PC-6 Package details

The photo of fuselage parts cut with CNC

The photo of wings components including LE, spar, TE and ailerons cut with CNC

The photo of 3 mm. balsa parts cut with CNC

Landing gear set and aluminum shock absorber

The photo of 6 mm. balsa parts cut with CNC

Adjustable brushless motor mount set

Epoxy adhesive 30 grams, nut, screws and etc.

Molded windshield and decals set


Pilatus Porter PC-6 kit details

Molded windshield and side windows

Bolt-on wing mounting and wing center section as the original Porter

Stab Fin and tail wheel position as an original Porter

Elevator designed as an original Porter

Rudder servo connect to tail wheel set using flexible pushrod for accurate control

Aileron designed as an Original Porter and aileron servo installation designed to protrude only servo arm


Pilatus Porter PC-6 at flying field

Before first flight at flying field with 40 mm. spinner

With C.G. on position make the nose heavy  2-3 degree

Flying weight should not exceed 820 grams and should get the thrust form motor at least 600 grams

The prototype using Brushless motor 2215 /1000 Kv with propeller 9050 giving thrust 700 grams

Pilatus PC-6 in the sky

Making a Low Pass giving scale feeling

The aluminum shock absorber performance as an original Porter ี

Thank you and hope you enjoy with building and flying PILATUS PORTER PC-6